Steamroller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw a small wooden Steamroller toy and studied how it was made. I back engineered it in Fusion.360 and shared it here
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After studying a small wooden steamroller model, I created the model of a Steamroller using Fusion360. When printing I selected supports for only the Chassis, Chassis Cover, and Roller Yoke to keep the holes as round as possible and less post cleanup. I used brim on the dowels, axles, exhaust, and steering wheel for bed adhesion while printing. I selected 100% infill on dowels, axels, and steering column for strength. After printing all the pieces, I clean them up with some very light sanding to knock off the sharp edges. I also lightly sanded the surfaces of areas I planned to glue together. For the holes in the Chassis, Chassis Cover, Yoke, Roller, and Rear Wheels I used a small power drill to clean up the hole.