1 / 3
Toyota MR2 SW20 TRD Style Rear Strut Brace/Bar Clips
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are clips that allow accessories such as rain shields to be attached to TRD or replica rear strut tower brace/bar
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 1227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
I made these to attach a custom rain shield to my TCS Motorsports strut brace. I assume these should work on any TRD rep/style strut tower brace.
Print out of high-temp resistant material such as ASA/ABS, Polycarbonate, or Nylon. I initially printed these out of PETG but the engine bay heat will cause the clips to deform over time and they will not hold up.
Clips designed to use an M6-1.0 nut (10mm wrench size) inserted so that a screw or bolt can be threaded on securely.