OXO Dish Brush Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for an OXO dish brush. It was made so the brush wouldn't get lost underneath any dishes and to prevent…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a stand for an OXO dish brush.
It was made so the brush wouldn't get lost underneath any dishes and to prevent dish soap from leaking out when not in use.
This design would work best in a 2 compartment sink.
While possible with PLA, it will last longer when used with a higher temperature plastic.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Filament: Overture PETG
Notes:
It works best if you print it on its side.
Use a brim to keep the thin spots in place.
Good Luck!
Category: Household