large baseplate for Makita/Katsu routers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large baseplate with handle for the trimmer-base of Makita and Katsu routers
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 668
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is not really a Remix but constructed entirely from the ground up. But it's heavily inspired so I wanted to pay my respects by marking as one.
Main differences to the original are a larger hole for router bits (as large as the trimmer base allows) as well as a locator for the handle to restrict any rotation. The base is also slightly larger and slightly different in shape.
For assembly, you'll just need a 40mm M6 screw and M6 nut.
printing advice
Because the base should flex as little as possible, I suggest printing with 4-5 outlines as well as 40%+ of Gyroid infill. For the handle, 3 outlines and 20% infill are enough.
The base needs support for the cutout of the M6 nut, the handle for the locator as well as the overhangs (unless your printer has a sick capability of doing them)