Raspberry Pi Pico BadUSB case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a Pico-based keystroke injection device / badUSB rubber ducky
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a redesigned case for a RPI Pico-based keystroke injection USB which features 4 cutouts for 6x6mm buttons for the selection of different payloads and supports for a 12x5mm switch to toggle the attack.
The increased number of buttons enables there to be up to 5 different payloads that can be deployed.
Replace code.py in the root folder of the Pico with the one included here.
The wiring is as follows:
Switch: GND to GP15 and GP0
Button 1 (payload1.dd): GND to GP11
Button 2 (payload2.dd): GND to GP20
Button 3 (payload3.dd): GND to GP7
Button 4 (payload4.dd): GND to GP26_A0
Don't hesitate to suggest improvements or ask questions.