1 / 4
Arducam Day / Night (B0205) case and swivel mount with Prusa & 3030 (Voron) brackets — zdjęcie 1
1 / 4

Arducam Day / Night (B0205) case and swivel mount with Prusa & 3030 (Voron) brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

enclose your camera, mount it to your Prusa or 3030 bracket, and swivel the camera to frame the perfect view.

Ocena
0 / 5
Polubienia
15
Pobrania
81
Wydruki
0
Wyświetlenia
698
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

***********IMPORTANT NOTE, THIS IS AN OLDER / UNMAINTAINED DESIGN********

I recommend you get the newer version which has many improvements: https://www.printables.com/model/1097162-swivel-mounted-camera-arm-mount-collection-for-pru 

the camera
The Arducam B0205 is a reasonably priced USB camera that switches automatically between day / night modes. It's by far the best camera solution I've found for Octoprint.

overview
I wasn't super happy with the various case designs I found; either for my Prusa Mk3 Mk4s or my voron. So I've built a parametric model that allows all of these things.

swivel system
You can swivel the camera 360 degrees on the x/y plane and tilt up and down pretty far on the z plane to frame the perfect shot. It's easy to adjust, but holds firm with printer movement.

why this remix?
This remix of my older solution adds thicker walls, a little more clearance from the Prusa bed, a better fit for M2x12 bolts & nuts, and support for 3030 rails (which are the standard for a Voron 2.4r2 and many other printers) and a back-mount model. With all the options there are now more individual models to choose from as well. If you've got a Prusa Mk3 or Mk4, it's as simple as printing the arducam-prusa-set.stl file; if you're looking to mount to a 3030 rail, use arducam-voron-set.stl and otherwise feel free to pick and choose!
 

feedback welcome!
I've included the OpenSCAD source for this parametric design, and I've done my best to make it reasonably easy to customize.