Bambu Lab P1P Stock Spool Holder Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this stopper to prevent the spool from moving back on the stock spool holder of the p1p.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I created this stopper to prevent the spool from moving back on the stock spool holder of the p1p.
I have run into issues with certain filaments and it jumping off the spool, and wrapping around the spool holder at the front because the spool as moved back during printing. So with this, this keeps the spool flush with the back of the p1p, preventing this issue.
I have two models.
One fits the Cardboard inland Spools. It also fits Bambu Reusable Spools. (17mm Depth)
The other fits the Inland Reusable Spools. (22mm Depth)
These are both designed for the 1kg spool rolls.
