1 / 2
3007 (30 x 30 x 7mm) Fan Module for Modular Snap Together Raspberry Pi Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created 3007 Fan Module for the Sneaks Modular Snap Fit Case
- Ocena
- 4,75 / 5
- Polubienia
- 10
- Pobrania
- 145
- Wydruki
- 6
- Wyświetlenia
- 520
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 8)Remiksy (2)Kolekcje (16)Powiązane
I created a fan module using the cheapest rpi fan I could find on Amazon - a 3007 (30x30x7mm) fan.
So far it has dropped my CPU temps from ~65C down to low 30C temps (with / without fan respectively).
Fan module is designed so that the 3007 fan is snap in place.
I printed in PETg, but probably could have gotten away with PLA due to the big drop in temp!
https://www.amazon.com/dp/B07C9C99RM?psc=1&ref=ppx_yo2ov_dt_b_product_details