Honeycomb Storage Wall AFA Debur Tool HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy duty AFA Debur Tool Holder for my honeycomb storage wall. The tool is 18.5mm diameter.
- Ocena
- 4,333 / 5
- Polubienia
- 54
- Pobrania
- 206
- Wydruki
- 5
- Wyświetlenia
- 1260
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
I made a heavy duty wall mount for my AFA debur tool to put on my honeycomb wall that holds 16 additional blades. I might make slimmer versions, but I wanted something more robust. Also, I put the mounts at the top so the whole thing doesn't pivot away from the wall with the weight of the tool. The mount uses slim hexes that slide into the hollow wall inserts. The tool sits 40mm into the mount and has a diameter of 18.5mm if you are looking to use other tools for this design.
I printed on a Bambu P1P with silk PLA and the following settings:
0.4 nozzle
0.2mm layers
3 wall loops
25% gyroid infill
standard speed
standard supports (for the 3 hex attachment points)
With these settings, it takes:
91.76g filament for the main body
3h8m print time