1 / 4
Wildman 3L bag clamp for Motus Scooty 10 Lite — zdjęcie 1
1 / 4

Wildman 3L bag clamp for Motus Scooty 10 Lite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp for rigid attaching Wildman 3Liter bag to Motus Scooty 10 Lite, It will work for other scooters with 40x33mm pipe.

Ocena
0 / 5
Polubienia
6
Pobrania
69
Wydruki
0
Wyświetlenia
544
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Clamp for rigid attaching Wildman 3 Liter bag do Motus Scooty 10 Lite.
It will work for other scooters with 40x33mm pipe.

Parts labeled U (up) go in place of the upper velcro, and D (down) in place of the lower velcro.
Punch and drill holes in the bag.

I suggest sealing holes after stitches to retain “water resistance”.

I printed in ABS for weather resistance.
Preferably use at least five perimeters.

Uses 4pcs M4x25mm hex screw and 4pcs M4 nuts.
(25mm are “exact fit”. You may need to use 30mm screws)
Holes for screws and nuts are “tight”, so you can press them in place.
Using a 4mm drill to clean up the holes is a good idea.

Tagi