1 / 5
Playing Card Holder for 2 Stacked Decks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 2 stacked decks of playing cards (33 mm stack height).
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 267
- Wydruki
- 3
- Wyświetlenia
- 974
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (42)Powiązane
Simple model to hold 2 decks of playing card whose original box is missing.
- Lid snaps in place and has a clover (clubs) decoration.
- Internal height is 33 mm.
There is a remix for single deck: https://www.printables.com/model/712156-playing-card-holder
Printing Tips
- Should be an easy print, any regular printing profile should work. I used 0.20mm PrusaSlicer SPEED with input shaper.
- Use 3 perimeters for strength.
- Octagram Spiral as top infill pattern gives a nice symmetric texture on this model.
Update, 2024 January 7: Improved Design
Thanks to toddleewalker for pointing out that standard sized cards did not fit. The grubby cards that I originally made this for had an unusually large corner radius. I have now updated the design so that standard cards should fit without problems. Also made some refinements for a more elegant look.