Bambu Labs AMS 2-tier stand V3, V5, V6, Vx
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the great model by @RogerReid_706824 This adds a 5th/6th version of the AMS which I received and 7th
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 363
- Wydruki
- 2
- Wyświetlenia
- 3212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TLDR - This is a universal version of upper and lower brackets which work with all recent AMS 1 / 2 Pro.
For 3 or 4 AMS units, see this model.
My AMS which was received in an X1 combo did not match any of the versions from @RogerReid_706824's model. I added another AMS in October 2024 which had only 3 pockets under the left and right side (approx. 67|83|67). I am calling these V6.
- The pockets for V5 are approx. 39mm, 48mm, 46mm, 48mm and 34mm from front to back.
- The pockets for V6 are approx. 67mm, 83mm, 67mm from front to back.
- The pockets for Vx are approx. 72mm, 73mm, 72mm from front to back (unconfirmed as I don't have one of these).
I also increased the pocket size for the 2020 extrusion to 20.2mm. When printed on my X1 with PETG it is a good tight fit.
NEW November 2024 - Brackets have been modified to accept V3, V5 and V6 versions of the AMS case and are no longer directional.
Update April 2025 - Confirmed the universal V3/V5/V6 model works for the AMS 2 Pro. I understand the AMS 2 is very slightly wider, @JeffSmith (MakerWorld) confirmed that you can stack an AMS on top of an AMS 2.
Update June 2025 - Added a version Vx for @SheepShagger_3361512 with 72|73|72 (untested, someone please confirm)
I used printer settings of 0.4mm nozzle, 0.2 layer, 4 walls, 4 top/bottom shell, 20% gyroid in PETG.