CR-6 SE Bed Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of this fantastic bed handle. I broke the original design trying to snap it on. And didn't read the…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of this fantastic bed handle.
I broke the original design trying to snap it on. And didn't read the suggestion to soak the snap on ends in hot water.
This design requires you to remove 2 screws and the spacers, insert the spacers into the holes and put the screws back in through the spacers and part. Takes less than a minute.
The spacers are 8mm and the holes are 8.2mm which on my CR6 is a nice tight fit.
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: ERYONE PLA+ Red
Notes:
PLA works fine as well.
Printed on the CR6.Category: 3D Printer Parts