Creality CR-6 SE Screen Bezel Cover - 2 colour
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Bezel cover and CR6-SE Logo with tabs to better secure it.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 402
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of the Bezel cover and Logo
When I printed the logo the original was 0.8mm tall and the extruder tip mangled the smaller text and didn't print the line.
This remix reduces the text height/thickness to 0.4mm (2 layers) and doubles the line width so it prints 2 lines wide. which means you can use a shallower Z-Hop of 0.5mm.
I also found on my Creality CR6-SE the Bezel was a little wider (96mm) so I made this a little wider and added tabs to secure it to the bezel.
Print Settings
Printer Brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: ERYONE PLA Black/Red
Notes:
I also changed the walls to 1.2mm which results in no infill in the walls making the print faster. With the Z-Hop enabled infill in the sides is very slow!