Fysetc Portable Input Shaper ADXL345 USB C Accelerometer Mounts For Biqu H2V2 & H2V2S X Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the USB accelerometer on your H2V2
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 1222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
…Please be sure to hit like & post a make, I'd love to see your prints!
Mount Fysetc Portable Input Shaper USB C Accelerometer on Biqu H2V2 & H2V2S extruders.
We have two mountings solutions for the X axis here.
An end motor mount that uses 2x M3 25mm bolts to attach the accelerometer to the back of the extruder motor. Use diagonal mounting. The accelerometer mounts directly through the single hole at one end & then you need to add a M3 SHORT heat insert to the larger hole at the other end, use a M3 5mm bolt to attach.
The other mount is for any of the H2V2 twin mounting bolt placements on the extruder body, they can be top, side, or bottom! The photo shows it mounted on the top. Use M3 regular length heat inserts in the raised mounting posts. Note the offset bolt usage pattern, see photo!
Best results print PLA 0.2mm layer height with 0.4mm nozzle
Be sure to check out my Y Axis mount for this accelerometer that uses a captive clamping system that does not damage your bed!
https://www.printables.com/model/498029-fysetc-portable-input-shaper-adxl345-usb-c-acceler