1 / 2
CO2 Weather station - case for Wemos, SSD1306, Senseair S8, MH-Z19 (remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the original model, having split it into 3 parts for easier printing and assembling.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (13)Powiązane
I remixed the original model, having split it into 3 parts for easier printing and assembling.
You will need 8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides.
I used Wemos D1 Mini, SSD1306 screen with SPI connection, MH-Z19B CO2 sensor and additionally DH11 to compare temperature results and get humidity data.