Printing Tools & Plates Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printing tools & plate holder that can be attached to the Bambu Lab Poop Chute by John Barron II.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 673
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is an organizer for your frequently used tools and 3 Bambu Lab build plates. Although designed to be attached to the Bambu Lab Poop Chute by John Barron II it will also work as a stand alone organizer.
The bins are based on the main design of the poop chute (same rounded corners and wall thickness). In order to keep everything together, the parts will either have built in connectors or, in case of the tall bin, a clip to connect it to the poop chute.
The organizer contains
- tall bin (with connectors on one side to attach it to plate holder). It has the same height as the poop chute in order to connect them with the clip
- small, long bin with dividers (with connectors to attach to plate holder) and attached tiny bin (perfect for storing filament spool clips ;-))
- plate holder (Remix of the Bambu Lab Plate Holder by TechSoft) for 3 build plates
- clip (to connect the tall bin to the poop chute)
- lid for the tiny bin
Little side note: I had to file down the connectors after printing, but I checked the model and it should be fine (although quite snug). So I assume this was because I didn't add support to the connectors - they will print without, but a little more wonky and therefore not fit precisely into the holes of the build plate holder.