1 / 3
Vorpal Laserblaster of Pittenweem (Gloryhammer) — zdjęcie 1
1 / 3

Vorpal Laserblaster of Pittenweem (Gloryhammer)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Vorpal Laserblaster of Pittenweem, from the Gloryhammer album "Return to the Kingdom of Fife"

Ocena
0 / 5
Polubienia
7
Pobrania
81
Wydruki
0
Wyświetlenia
787
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hail, mighty warriors! If you'd like to smith your very own Vorpal Laserblaster, you've come to the right place! A STEP file has also been provided to allow you all to remix and make changes easier, since editing STL files is abysmal.

 

Print one of every piece except for the magnet (print two of those). Depending on the size of your printer and your tuning, it may be easier to print the chassis in two halves and then glue them together. If this is the case, print both chassis halves (chassis_L and chassis_R) instead of the entire chassis. To assemble, I found it easiest to glue the chassis halves first using the scope and shaft to keep them aligned, then gluing the grip and mid sight. The shaft, rings and barrel can all be glued on together. Just slather the entire shaft in glue and then slide the rings over it, before capping it with the barrel. Good luck! I'd love to see some of the finished prints! my IG handle is @electric_masquerade - tag me if you make one!