PET & Sigg bottle pneumatic air tank adapters for fischertechnik
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn PET soda bottles or Sigg water bottles into air tanks for fischertechnik pneumatic applications
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1478
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn PET soda bottles or Sigg water bottles into air tanks for fischertechnik pneumatic applications.
Both kinds of bottles are suited for compressed air up to at least 1 bar, the Sigg metal bottles are perfect for vacuums. The PET adapter is suited for caps marked with "cr-cap".
Fittings
Both PET and Sigg adapters come in versions with two or three fittings, the latter is useful for directly connecting a gauge like this one.
There are versions for two types of fttings, the Sigg design only supports the second one:
- all-in-one printed fittings (see last image middle of bottom row). It's a bit harder to print those air tight, and they are less flexible than the second solution:
- with 5 mm holes for external M5 threaded pneumatic fittings with matching silicone/NBR o-rings. There are plenty of variants like M5-AU, M5-ALU, M5-PB, M5-SL with valve etc., e.g. on aliexpress or you can use one of my printed desings (see last image).
Note that the printed holes are not threaded. Use a M5 machine screw to cut the threads (see last image). Make sure that the outer surface remains clean and flat, as it is here that the fitting's small O-ring will need to seal things air tight.
Gaskets
As gaskets you can use 28x4mm silicone O-rings for the PET bottles and original spare parts for the Sigg bottles (I got mine here).
Alternatively, both will work with gasket rings cut from rubber sheets, even old bicycle tubes can work. Stencils for cutting those to size are included for both adapters. Try two layers if one does not work and make sure they are perfectly clean and dust free.
Print Settings
Printer:
Creality Ender 3 v2
Rafts:
No
Supports:
No
Resolution:
.1 - .2 mm
Infill:
15%
Filament:
any PLA/PETGany
Notes:
Print all adapters bottom/open side up, of course.
For airtight printing the general wisdom is to- increase number of walls (I use 5)
- lower print speed
- increase extruder temperature
- decrease fan speed
- decrease layer height
- smooth critical surfaces (those that have contact with O-rings)
- avoid quality deteriorating printing problems, particularly stringing and oozing
Do not increase flow rate as this will make the fischertechnik connectors too tight.
Category: Construction Toys