Huawei Mateview power supply under-desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have the lovely Huawei Mateview screen and I wanted to be able to fix the power supply under my desk.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
The print is pretty easy to perform, print on the side so you don't need supports, but don't print in PLA, I repeat DON'T USE PLA. The power supply will go easily around 60° and you print will just become something like a Salvador Dalí artwork ( The persistence of memory ).
PETG is just fine. I used some Tesa Powerstrips Small (not an affiliate link), 4 in total, 2 per piece.
I would recommend printing 2 pieces for a better holding.
Looking for a commercial license? Checkout my membership page