1 / 2
Parametric FPV EMAX RS2205 2300KV Sliding Feet — zdjęcie 1
1 / 2

Parametric FPV EMAX RS2205 2300KV Sliding Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some Sliding feet for the EMAX RS2205 2300KV motors.

Ocena
0 / 5
Polubienia
0
Pobrania
26
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Some Sliding feet for the EMAX RS2205 2300KV motors. In the F3D file, you will find 3 parameters.

Parameters

  • rib_size This defines the size of each of the 4 ribs (as rib_size * 2)
  • foot_diameter This defines the total diameter of the foot.
  • height This defines the height of the flat cylinder section up to the start (but not including) the ribs.

Versions

In the files you will find 2 versions:

  • v1 has 4 holes needing a screw meaning that to attach, you will need to remove all 4 motor screws.
  • v2 has 2 holes needing a screw meaning that only 2 of the further (from each other) screws need to be removed and the foot goes around the other 2.

This was done to ease replacement in the field.

Tagi