Prescription pill bottle rack (2 sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack to hold standard size prescription bottles. Added smaller version for 235mm beds.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 884
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I decided to try and make a rack to hold standard sized prescription bottles since I have a lot of empty ones I use for parts and such. This particular first run will include the five bottle version, but that can only be printed on a printer that can support a model that's 250mm wide. I use a Voron printer with a 300x300 bed to print these.
Added smaller version for 235mm beds as well on Jan 28, 2024.
The standard bottles I am using are from Walgreens and are about 39mm in diameter. Please measure yours before printing. If there's another common size I might be able to accommodate that in a future model.
The rack comes in two versions - one complete with a grid pattern embedded in it, and two other files that can be printed in different colors and glued together, which is what I did for the example photos.
The last photo shows a set of BB ball bearings I added to add weight to this. I added them while printing using a straw and using Prusa Slicer's “lightning” infill which is mostly empty at the bottom. I have a grid infill for the first cm of the model.