V400 Sensor Magnets Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V400 dual sensor magnets holder. This file is a remix of 2 projects with the addition of 2 grommets
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Used Kevin Mauel's model to apply my magnetic support for the bed leveling sensor and a simple cable holder redesigned by me.
Single version for 2 sensors and 2 cable holders.
Round 10mm x 3mm magnets were used to avoid going crazy with the polarity of the magnets of the 2 sensors which could be reversed as in my case
Use a drop of cyanoacrylate glue (like Attack in my case) to glue the magnet in place, even if it is already quite still.
In the photo there is also the support for ADXL345(FYSETC) with sensor already mounted available at: https://www.printables.com/it/model/356821-flsun-adxl345-fysetc-for-v400-sr
Printed in PETG with V400.
Profile available on a Facebook group FLSUN V400 for printing at 200mm/s with supports.
40% filling but also works at 25%