1 / 1
Noctua NA-IS1-12 Anti Vibration Pads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Similar to the included NA-AV3 anti-vibration mounts if you buy the NA-IS1-12 inlet spacers for 120mm fans
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 953
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (31)Powiązane
Print in a soft material like TPU. Design extends past the frame by 0.4mm to allow for compression during installation, scale accordingly for more/less hard materials.
0.1mm clearance from the pocket perimeter, fitting may be tight/loose depending on your printer's accuracy