Galaxycore Remix of Master3D's Masterspool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better Galaxycore for the Masterspool
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Galaxycore of the Masterspool is a good idea, but the model had two problems:
- the tips of the wings are too thin and break off easily
- the thread had some errors in the stl-file (you can see them if you zoom in in your slicer), so it didn't print proper.
I have shortened the wings a little bit, so the tips are stronger. The tension of the Galaxycore itself is the same.
And I redesigned the thread (that was a nightmare, because it' not a standard thread).
Update 2023/06/12:
I updated the 60mm-Version, because I realized, that the first version was too stiff. Now the diameter is smaller, so it's easier to put the galaxy-core in the refill ring. I also added a Brim-version. The small Brims at the wing tips prevent it from warping and are easy to remove.
If the other versions doesn't fit, please let me know! I only have Bambu-refill here, so I'm not able to test the other versions.