Effortless Easy Insert Filler - HSW Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A one piece, easy to use filler for the easy insert pieces by KYZ.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 810
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Have you ever tried doing a jigsaw puzzle in the dark? That's a doddle compared to using the original filler pieces from KYZ. Two separate parts to assemble, requiring three hands, the dexterity of a concert pianist, and the patience of a zen master.
After grappling with this conundrum, I did what any rational person would do—I threw an inordinate amount of time into designing a new filler. Why simply deal with the problem when you could make a whole new one, right?
Based on the original HSW insert, my version fits the easy inserts from KYZ, but in a single piece. So you don't need to be an octopus to use it.
Just stick to the standard print settings for HSW inserts, and you're all set. This little chap doesn't require support when printed face down, which is rather handy.
- Layer Height: 0.2
- Perimeters: 4
- Infil: 20%
- Support: No
But why stop there? I'm currently tinkering away on a parametric hook inspired by KYZ's originals. The idea? A few clicks and you can rustle up the perfect size. Keep an eye out for its release.