Mini mixing bowls and spatulas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of mini bowls and spatulas for mixing small volumes of paint, epoxy and glue. Bowls start at 30mm for 0.5ml mixing
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of 4 mini bowls and 6 mini spatulas for mixing small quantities of paint, epoxy, glue and other liquids. The smallest bowl can fit up to 1ml of liquid, but it is designed for 0.5ml. Please note that some mixtures will expand during mixing, so never fill these tiny bowls up to the top.
Printing
These mini bowls are designed to be printed at 0.2mm layer height or lower. Other print settings don't matter much, but please make sure that your printer is set up to produce water tight objects. If you're unable to produce water tight models, you can coat the bowls in epoxy or other compatible sealant.
Your plastic choice (and, optionally, sealant choice) depends on the liquids you are planning to mix. Don't use ABS for mixing acetone solutions, for example.
Bowl sizes
- 30mm - 1ml
- 30mm - 2ml
- 50mm - 4ml
- 50mm - 8ml
Spatula sizes
- 40mm rectangular
- 40mm tapered
- 60mm rectangular
- 60mm tapered
- 80mm rectangular
- 80mm tapered