Magnetic Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
61.5mm Lid With magnets
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This model fits jars that have 61.5mm diameter and 64.5mm with thread.
Works great as a concept, but my initial 1x5mm magnets are too weak to make it snappy. Once I get my hands on 1x8 magnets, I will re-print the lid. Perhaps add different openings per suggestion. Maybe I will make a version with replaceable lids
The new model is a bit taller to make it fit the whole thread. Also, I moved the magnets closer together for more strength.
You will need:
6 - 1x8mm circle magnets
1 - Pause print to insert magnets in the inner part
1 - Glue magnets on the outer shell after completed print. (Decided to do this for better magnetic force) And they will not be seen since they will face inside the jar.