Side Mounted Spool Holder for Bambu Lab P1P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple spool holder for the side of the Bambu Lab P1P 3D print
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 162
- Wydruki
- 6
- Wyświetlenia
- 1083
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
Ever since I got my P1P, the back mounted spool holder has been an annoyance, so I designed this simple side mounted spool holder. It hooks onto the side of the frame and pops into a small hole. You should be able to push down on it once hooked until the small bump on the back of the model fits into the hole in the printer frame. The bottom hook snaps around the frame to hold it in place firmly.
No supports are needed and it shouldn't need a high infill - 5% works fine. I printed this in PLA Pro, but normal PLA should work, although make sure the filament can bend a bit and isn't too brittle. This model should print in around 30 minutes (amusing you are using the P1P).
Changelog
6/23/2023
- Added support for the spool holder to stop bending
- Added a bottom hook to “hug” the frame
6/20/2023
- Adjusted shape for more flexibility between spools
- Increased length to allow for slightly wider spools
- Removed fillets on the end of the spool holder for better print quality
6/8/2023
- New shape to better fit filament spools
- Lowered length of holder to better fit the width of filament spools
- More firm fit onto frame