HTC Vive Link box 5.25" drive bay mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For routing your HTC Vive cables from the back of the PC to the front, for easier attach/detachment.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a reupload of my old Thingiverse project of the same name. Below is the old description.
Based off of this thing here, but made larger to fit in 5.25 inch drive bays!
With all that out of the way, there are some final notes I should add.
I don't remember exactly what extender cables I used for routing the USB and HDMI to the front, but they were about 3 feet, and the 12V power actually came off of my PC's power supply and into a barrel jack pigtail. I have added the STEP file for adjusting the print as needed in your CAD program of choice, along with the Autodesk Inventor Part file for use in Autodesk Inventor, and STL file from the original post.