Tiny bottle / jar with screwcap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute 2ml bottle / jar with a threaded cap. 2cm height, 1.5cm in diameter. Beware: it's tiny.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 225
- Wydruki
- 2
- Wyświetlenia
- 867
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A cute 2ml bottle / jar with a threaded cap. 2cm height, 1.5cm in diameter. Beware: it's tiny. Look at the photo with coins/ruler to see the scale.
Print instructions
Notes
Probably with a bigger nozzle the bottle would be more translucent. Wall thickness is 0.5mm, so such nozzle would do one perimeter only. I used 0.25mm to get nicer threads.
Design
Bottle cross-section has been drawn in qcad (with some space for the thread).
Then the thread & rotate extrusion has been done in openscad.
It might be considered as remixable, but it would take probably beyond an hour to remix and test.