1 / 2
jaR2-D2 articulated mason jar lid — zdjęcie 1
1 / 2

jaR2-D2 articulated mason jar lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is totally the droid you're looking for

Ocena
0 / 5
Polubienia
356
Pobrania
315
Wydruki
1
Wyświetlenia
3332
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I remixed my own R2-D2 design to create this. That R2-D2 is also remixed from soozafone's fantastic Lucky 13 model. 

There are definitely more Star Wars themed lids out there to be made, a Jar-Jar Jar Lid perhaps or even a Darth Lidious. I'm just not sure I have it in me to make those. I feel like I've been slacking on my Mini 13 remixes and would like to get back to making them soon.

 

  • If a part has [x2] in the file name, then you need to print two of that part
  • I printed everything in PLA at a layer height of 0.2 mm and a speed of 100 mm/s.
  • The middle foot is being held to the jar via magnets. I have a loose 4mm x 25mm magnet sitting in the bottom of the jar and I have another 4mm x 25mm magnet attached to Magnet Adapter.stl. If you plan on storing food in the jar, obviously you won't be able to use the middle foot.

 

ASSEMBLY: 

Assembly is straightforward. Head Grey.stl fits over top Head Blue.stl and they snap into Lid.stl while the “eyes” fit into the head and Lid Insert.stl into the lid as seen in the photo below.

 

You will need to connect Arm Blue.stl to both the Foot.stl and Lid.stl before sliding Arm White.stl over Arm Blue.stl.

Tagi