Drill bit box set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of 6 boxes for drill bits ranging 0.3 ÷ 4.2mm. Fits standard length drill bits. Compartments every 0.1 mm.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 198
- Wydruki
- 2
- Wyświetlenia
- 1593
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A set of 6 boxes for drill bits ranging 0.3 ÷ 4.2mm. Fits standard length drill bits. Compartments every 0.1 mm.
Lids have embossed labels (sizes).
Boxes are of similar size, largest is 7×9cm
This design uses a length of 1.75mm filament as the rod for hinges.
Lids are kept in place by latch-like mechanism.
(These are the sizes that mini drill can fit in it's 0.3-4mm chuck.)
Print instructions
Post-processing
- Use 1.8mm drill to finish the holes in box
- Use 2mm drill to finish the holes in lid.
- Place lids on the box.
- Put 1.75mm filament through the holes.
Customizing
This design is fully customizable - take a look at any wrtblox_*.scad (that contain customizable parameters and include base.scad that does the dirty job).
Notes
Obviously a transparent filament for the lids would be a better choice.
I printed mine out of ABS, other plastics would probably be better (sturdier).
For a better visibility I used a black marker on the embossed text.
Credits
The font used in designs is "Scriber Bold Stencil" by Jonathan Hill.