1 / 4
Miele vacuum accessories holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement/alternative accessories holder for Miele C2 series
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 959
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
The retaining tab on our Miele Compact C2 broke, and it can't be fixed without replacing the whole hose and connector. Instead, this part clamps on the connector, and can be oriented on either the front or back side.
Designed for a Miele Compact C2 but most likely compatible with more models. The diameter of the connector is 54.50 mm.
No supports or brims needed. Designed to print with a 0.42 mm line width.