1 / 4
USB Type-C 5v power breakout board enclosure — zdjęcie 1
1 / 4

USB Type-C 5v power breakout board enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This case is made to fit LGDehome USB Type-C Breakout Boards available on Amazon and other websites.

Ocena
0 / 5
Polubienia
13
Pobrania
161
Wydruki
0
Wyświetlenia
749
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This USB Type-C enclosure is built to fit LGDehome breakout boards perfectly.  There is a hexagon on the bottom made to fit inside the hexagon hole at the top of the Z axis on the Prusa MK3s.  It has a small opening in one side to allow access to the power and ground pins.  The other side has an openig for the USB Type C cable.  You could use this to power anything that needs 5v but I used it to power my 40mm fan on top of my extruder.

Tagi