LittleCloud acro handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a handle add-on for the LittleCloud brake loop.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
These are acro brake handles designed to fit the LittleCloud Paragliders brake handles. You don't need to undo any knots, or disassamble the wings brake handle, just fit these ones on, and screw the tight!
The previous design used nuts and bolts from the hardware store. These ones use a set of 3D printed bolts.
The bolts are not really interchangable so one of the bolts has a tiny hole wich coresponds to the handle marked with another tiny hole.
There are two variants a big one (110x30x22 mm - full hand design) and a little one (65x30x22 mm - two finger design).
Print the parts flat on the bed, and the screws upright (the threads shouldnt need any supports). (the models are already layed out for printing)
Layer hight of 0.2 mm (with 0.4 nozzle)
Perimeters - 3
Infill 5% (Giroyd)
I am using PET-G for these.