Pool Noodle Sword Handle Remix

This is a remix of one of the excellent handles by @TripleGWorkshop. It provides a stronger print by changing the orientation during printing. The original model is split and alignment pins have been added to aid in gluing the halves of the model together. The original work includes a couple of other nice handles. Rather than recreate those here I would suggest that you download the handles from the original creator and use the PrusaSlicer functions to rotate, split and add dowels to the model. If you are new to 3D printing you will find this method of adapting models to be extremely useful. This is a great model on which to try out those slicer features. The 3mf file includes two sets of alignment dowels. One set is slightly smaller and may work better for some. The 3mf file also is set to print a brim around the alignment dowels but not the handle parts if you check the option to print a brim. I found that printing at 0.2mm layer height with 15% gyroid infill and 4 perimeters made an exceptionally strong handle. Printing at 0.3mm layer height with 20% cubic infill also worked very well.