Bambu Lab X1C Alveo3D HEPA filter with extra magnets - AMS compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Matt Rayne's filter housing that is compatible with an installed AMS hub
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 05-Oct-2023
added a version with 6x3mm magnets
Matt Rayner created a great remix of a HEPA filter housing for the Bambu Lab X1. It houses an Alveo3D “P3D” filter which combines a HEPA filter and an activated carbon filter, so it filters both nanoparticles and VOCs.
The housing uses several 8x3mm magnets. Unfortunately, it does not fit if the AMS hub is installed on the back of the printer. I changed the housing to make it fit.
Once the Alveo3D filter is installed, you can/should remove the Bambu Lab activated carbon filter. It is unnecessary and significantly worsens airflow to have two carbon filters installed.