Refrigerator Door Closer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet-based Refrigerator Door Closer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried just about everything to keep my refrigerator door shut when people (kids) closed it. The refrigerator door would appear to be mostly shut, but I would notice a slight line of light escaping and condensation when someone (kids) just barely closed it. I adjusted the hinges, replaced the door gasket, WD40, etc. but it needed just a little helping hand to stay 100% closed.
I looked all over for a 3D model to solve the problem but I couldn't find anything that was unobtrusive and worked well.
I had some time on my hands this week so I designed the following magnet-based closer. I printed in grey to match the stainless steel and glued it to the top of the refrigerator door where it was not noticeable. It works like a charm. Now, no matter who closes the refrigerator door, it closes with a satisfying, solid click.
I printed in the orientation of the .STL for strength and glued a 60x10x3 mm neodymium magnet into the holder.