Kids Boogie Board Stencils and Styluses *15 Different Stencils!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement stencils and styluses for kids Boogie Boards
- Ocena
- 0 / 5
- Polubienia
- 110
- Pobrania
- 438
- Wydruki
- 1
- Wyświetlenia
- 1627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I decided to combined a few of my published models. Now you can find all the same fun stencils and styluses in the same place!
Our kids Boogie Boards came with some neat stencils (a lion and a butterfly). Unfortunately with them being made of a thick paper, they got trashed real quick. So, I've been making my own since I haven't found anyone else already doing it. I'll probably be adding stencils to this page occasionally, so be sure to check back.
Tip - If printing the Rocket Stylus, you may need to look at adjusting your horizontal expansion to help fit the threaded flame. Most recently using Orcaslicer, my default H.E. setting was ‘0.1’. This was too tight. After adjusting this setting to ‘0.2’ as well as accounting for the height of the flames threads, it fits nicely. To clarify here, I only adjusting H.E. settings for the flame. YMMV, but hope this helps someone. If the tolerance is too tight it may break when trying to install it.