Vampire: Chapters State Card HP Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this Slider to track NPC HP without denting the cards!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The HP Clips for the NPCs have an unfortunate tendency to dent the cards & sleeves when they're used. So, use this slider instead! Just snap the Ankh HP Tracker into the slot in the bottom (turned Ankh-side upright) and slide the card in above it and you're good to go. The slot is a little tight so that the HP Tracker won't slide around on its own and it has a small lip on the bottom edge to help it not pop out accidentally. The best way to get the tracker into it is to put the tip down on that bottom lip and then rotate it down into position in the slot. There's enough of a gap that you can slide the NPC State Card in or out without removing the HP Tracker.
As always, the .blend file for this model is available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!