SAMURAI logo from Cyberpunk - sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wake up SAMURAI, we have city to burn. My creation of Samurai logo from Cyberpunk 2077 I hope you will enjoy it :).
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 459
- Wydruki
- 6
- Wyświetlenia
- 3044
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Wake up SAMURAI, we have city to burn.
My creation of Samurai logo from Cyberpunk 2077 I hope you will enjoy it :).
Printed on MK3+, little bit of sanding at the end should remove some imperfections, just be carefull so you don't remove the tiny details on printout.
Dimensions (h x w): 15mm x 13mm
Stand: https://www.prusaprinters.org/cs/prints/154505-sign-stand
Print instructions
IMPORTANT - there are 2 colour changes as follows, 2.0-2.2 (Silver) and 2.4 - 2.6 (Red) Start with black 0-1.8.
2 perimeters
15% infill
Ironing for top layers only. Use height range modifier for layers 2.0 - 2.7 with ironing turned on. Flow was decreased to 10%.
I used top layer extrusion multiplier raised 0.45 because I'm still fighting with gaps between perimeters.