Bike lock holder or mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't like the mount that came with the lock so I designed my own. After several months of testing through winter…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I didn't like the mount that came with the lock so I designed my own. After several months of testing through winter and spring, it never gave up on me.
It uses a cuff, generally used for tightening rubber hoses - this version is 9 mm wide and aprox 50 mm diameter. You can find the exact one I bought here: https://www.bauhaus.info/installationszubehoer/schlauchschelle/p/22628798
The 4 pegs are optional and do not need to be printed. If you do decide to print them, make sure to glue them in one half of the mount - this will make installing much less fiddly.
Hope you will find it useful and if you do, please drop a line and let me know.
Happy cycling and safe cycling!
Category: Sport & Outdoors