Xiaomi M365 Scooter Rear Light Cable Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This guard clips at the bottom-rear of the scooter and guards the light cable.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 177
- Wydruki
- 2
- Wyświetlenia
- 662
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
I took the already great idea and improved it in the following aspects:
1. Added two clips, meaning you no longer need to glue the part onto the scooter. This works best with PETG, since the clips are very strong and springy then.
2. Added holes at the bottom allow strongly securing the guard to the scooter with cable ties / fasteners. This is best used when printed with PLA, since the clips aren't as strong and tend to break.
3. Made the base bigger, which means it adheres better to the print bed. Not only that but then it repels dirt and water from under the bottom while driving in wet conditions.
4. Extended the cover up to protect a larger cable length.