1 / 4
8 Whiteboard Marker and Brush Holder with dust openings — zdjęcie 1
1 / 4

8 Whiteboard Marker and Brush Holder with dust openings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remixed this to add dust holes in each marker hole as well as a square hole for the brush holding area.

Ocena
5 / 5
Polubienia
19
Pobrania
94
Wydruki
3
Wyświetlenia
577
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

I remixed this to add dust holes in each marker hole as well as a square hole for the brush holding area. I don't want dust or bits of brush collecting and gunking up the bottom of the holder, so this will keep it cleaner plus, you can push your finger through the bottom to get the brush out.

I also reduced the height of this slightly from the original as I didn't need it that high. It reduced my overall print time from ~7hrs to ~5hrs.

Print instructions

10% infill, 0.20 layer height, PLA
No raft/support needed.

Tagi