1 / 2
125mm / 5inch vise soft jaw grip with v-grooves — zdjęcie 1
1 / 2

125mm / 5inch vise soft jaw grip with v-grooves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

As the name implies, another vise soft jaw design, but for 125mm, including v-grooves.

Ocena
0 / 5
Polubienia
9
Pobrania
97
Wydruki
0
Wyświetlenia
581
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

As the name implies, another vise soft jaw design, but for 125mm, including v-grooves. There's holes to insert d4x12.5mm supermagnets for easy clamping.

The hight of the standard vise jaw of my vise is 20mm, so the softjaw is made to fit around that.

Print instructions

Printed on a Prusa mk3 i3s+ with 0,4mm nozzle in PETG, 4 shells, line width of 0,6mm, except for 0,45mm external perimeters,15% rectilinear infill and 0,15mm layer thickness. I had adhesion problems so I used a brim.

Print it lying down on the flat side, or if you're a risktaker: on the short end.

Tagi