Portioning Lid - 5ml / 1 teaspoon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mostly print-in-place lid for 70mm single continuous thread jars that portions 5ml or 1 teaspoon of powder/liquid.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mostly print-in-place lid with a knob you have to glue in, that fits half inch pitch, 70mm outer diameter rim jars that portions 5ml or 1 teaspoon of powder or liquid. Latter only recommended for liquids with high surface tension and you have amazingly beautiful prints. Any imperfection on the sliding surfaces will result in leaks.
Because plastic on plastic action = microplastics, I don't recommend using it for food. Just a concept I'm playing around with.
Since it's print-in-place with 0.25mm clearances, make sure your printer isn't overextruding or things will fuse together.
Nozzle size - 0.4mm
Layer height - 0.2mm