Human Wall Ear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of addamays123's Human Ear: modified with two pilot holes and countersunk holes so that you can screw in onto…
- Ocena
- 4 / 5
- Polubienia
- 28
- Pobrania
- 191
- Wydruki
- 2
- Wyświetlenia
- 1286
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
A remix of addamays123's Human Ear: modified with two pilot holes and countersunk holes so that you can screw in onto a wall. It also comes on a slighly raised platform, the idea being that it could function as a coat hook, although I haven't tested if it actually holds a coat. Meshmixer supports are included in the file, which also might cause it to be oriented on the Y-axis at import: simply rotate it 90 degrees to put the supports on the build platform.
Print instructions
Printed it with 0.1mm layers, 15% infill and a brim, on an Ultimaker 1 using Cura: no problem whatsoever.