Audeze Penrose/Mobius cup band replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement cup band for audeze penrose or mobius headphones
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 296
- Wydruki
- 3
- Wyświetlenia
- 1718
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of thingiverse model, with a much steeper angle from headband mount point to cup, making it clamp on the head much harder. The original model made my headphones too loose on my relatively small head, making it unstable and improperly sealing the headphones leading to poor bass. I've also modified the cable channel a little bit resulting in better cable retention, I had to use glue in the original model to retain it. This one is… still not perfect, but much better at retaining cable.
My print is from ASA though unsmoothed with acetone. Standard infill settings, remember to add supports as this cannot be printed without. The model is already best oriented for printing.
This is the left cup band, to print the right one simply mirror the model.
Also I recommend reading the description from the original thingiverse submission, lots of helpful tips there.