Wingspan Bird Box + Bird Tray Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits on top of the player boards, so can directly swap in for the existing card tray.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 814
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits on top of the player boards, so can directly swap in for the existing card tray. I also printed up a box to hold bonus/automata cards.
Holds unsleeved Bird cards from the base game + European Expansion + Oceania Expansion. There's not really any more room vertically for more expansion, but adding another box wouldn't be
hard to the side.
Bird tray lid is remixed from https://www.thingiverse.com/thing:4062656. The base itself is a modified box from the Boardgame Insert Toolkit.
Uses magnets to hold it on.
Print instructions
Printed in PLA at .28mm layer height for the body and .12mm layer height for the lid.
The holes are exactly 4mm diameter, so depending on your magnet size you might need to widen the holes a bit. I ended up just using 3mmx3mm magnets and they work fine.